| U型槽模具材料使用与分析 |
| 添加时间：2019/1/17 14:48:16 浏览次数： |
| U型槽模具材料使用与分析是按照当前对混凝土U型槽的制作方案而言，一般U型槽模具都是以钢模板为主要使用原材料，利用电焊机进行焊接组装，根据U型槽预制块的大小选择不同厚度的钢板，这是制作钢模具的主要原则。从U型槽的预制来看， 往往壁厚不会超过10厘米。 The usage and analysis of U-groove die material is according to the current plan of making concrete U-groove. Generally, U-groove die is made of steel formwork as the main raw material, welded and assembled by welding machine, and steel plates of different thickness are selected according to the size of prefabricated blocks of U-groove, which is the main principle of making steel mould. According to the prefabrication of U-groove, the wall thickness will not exceed 10 cm. U型槽模具材料使用与分析是用钢板焊接建造的。钢模具具有坚固耐用的特点，而且同其他材料相比，他具有节省钢材，成本更低等优点。由于U型槽都是一些水泥制品，其压力大重量大，所以在选用的时候钢板厚度需要注意，U型槽钢模具的尺寸规格有经常使用的几种，同时这种U型槽尺寸规格小的可以选用薄一点的钢材，超过1米的模具在使用薄的钢材比较不合适，应该选用5mm厚一点的钢材，选用钢模具生产能够降低一定的生产困难，同时这种钢模具使用寿命很长，可以大大的提升产品的生产效率。 The usage and analysis of U-groove die materials are constructed by welding steel plates. Steel die has the characteristics of ruggedness and durability, and compared with other materials, it has the advantages of saving steel, lower cost and so on. Because U-shaped groove is some cement products, its pressure is large and its weight is heavy, so the thickness of steel plate should be noticed when selecting. The size specifications of U-shaped groove steel die have several commonly used ones. At the same time, the smaller size specifications of U-shaped groove can choose the thinner steel, and the more inappropriate use of thin steel for the mould over 1 meter, the steel with a thickness of 5 mm should be selected and the steel die should be selected. The tool production can reduce certain production difficulties, and the service life of the steel die is very long, which can greatly improve the production efficiency of the product. |
| 上一页 设计主要从以下两个方面影响冲压模具的使用寿命 |
| 下一页 模具的分类 |
Copyright © 技术支持：遨游网络