| T型槽曲铮 |
| 添加时间：2020/1/2 14:43:07 浏览次数： |
| T型槽曲铮不要在潮湿、有腐蚀、过高和过低的温度环境下使用和存放。在使用时要先进行弯板的安装调试，然后，把弯板的工作面擦拭干净，在确认没有问题的情况下使用弯板。T型槽曲铮用于零部件的检测和机械加工中的装夹。用于检验工件的90°角，维修设备时检验零部件相关表面的相互垂直度，还常用于钳工划线。并可常用于检验、安装、机床机械的垂直面检查，并能在铸铁平板上检查工件的垂直度，适用于高精度机械和仪器检验和机床之间不垂直度的检查。 T-groove should not be used or stored in humid, corrosive, too high or too low temperature environment. During use, the installation and debugging of bending plate shall be carried out first, and then the working surface of bending plate shall be wiped clean, and the bending plate shall be used after confirming that there is no problem. T-groove bending is used for parts detection and clamping in machining. It is used to check the 90 ° angle of the workpiece, check the mutual perpendicularity of the relevant surfaces of the parts and components when repairing the equipment, and it is also often used for marking by the fitter. It can be often used for inspection, installation, machine tool mechanical vertical plane inspection, and can check the perpendicularity of the workpiece on the cast iron plate. It is suitable for the inspection of high-precision machinery and instruments and the inspection of non perpendicularity between machine tools. |
| 上一页 U型槽螺旋输送机适用范围 |
| 下一页 斜滑块脱出机构 |
Copyright © 技术支持：遨游网络